| Maxim | Audio | AN3266: Using the DS80C400/TINIm400 for Remote Audio |
|
| Maxim | Audio | AN3483: Audio Filtering with the MAXQ2000 |
|
| Maxim | Audio | AN4148: Piezoelectric Tone Generation Using the MAXQ3210 |
|
| Maxim | Audio | AN609: Internet Speaker with the DS80C400 Silicon Software |
|
| Maxim | Bootloader | AN102: Using the high-speed microcontroller as a bootstrap loader |
|
| Maxim | Bootloader | AN3013: Boot Loader Instruction Sets for the TINI Platform |
|
| Maxim | Bootloader | AN3398: DS80C400/DS80C410/DS80C411 Network Boot |
|
| Maxim | Bootloader | AN4012: Implementing a JTAG Bootloader Master for the MAXQ2000 Microcontroller |
|
| Maxim | Bootloader | AN4023: How to Use the CAN Bootloader to Load User Application Code in the MAXQ7665A |
|
| Maxim | CAN | AN2935: Design Considerations for CAN Bus and Asynchronous Serial |
|
| Maxim | CAN | AN3553: CAN-to-Ethernet Using the DS80C400 |
|
| Maxim | Connectivity | AN148: Guidelines for Reliable Long Line 1-Wire® Networks |
|
| Maxim | Connectivity | AN155: 1-Wire® Software Resource Guide Device Description |
|
| Maxim | Connectivity | AN193: Extending 1-Wire® Range with Network Proxies |
|
| Maxim | Connectivity | AN2792: DS80C400/DS80C410/DS80C411 Network Micro |
|
| Maxim | Connectivity | AN3314: Networked Microcontrollers: IPv4 Address Configuration |
|
| Maxim | Connectivity | AN3552: Low-Cost Controller Includes Integrated Web Access |
|
| Maxim | Connectivity | AN3804: Frequently Asked Questions (FAQs) about Networked Microcontrollers |
|
| Maxim | Connectivity | AN3931: Network Enable Your Old Computer Peripherals |
|
| Maxim | Connectivity | AN703: Embedded Networking with IPv6 |
|
| Maxim | Connectivity | AN710: Dial-Up Networking with the DS80C400 Microcontroller |
|
| Maxim | Connectivity | AN711: Creating Networked Multimedia Applications with the DS80C400 |
|
| Maxim | Data Conversion | AN1918: 12-Bit ADC Upgrades µC's Internal 8-Bit ADC |
|
| Maxim | Data Conversion | AN3083: Performing ADC Conversions Using the MAX7651 |
|
| Maxim | Data Conversion | AN4194: How to Use the MAXQ2000 as a Voltmeter |
|
| Maxim | Data Conversion | AN4453: Using the MAXQ3180 Analog Front-End in a Single-Phase Configuration |
|
| Maxim | Data Conversion | AN826: Interfacing the MAX7651/MAX7652 12-Bit Data Acquisition System to the 24C02 2-Wire Serial EEPROM |
|
| Maxim | Display - Segmented | AN3548: Using an LCD with MAXQ Microcontrollers |
|
| Maxim | Display - Segmented | AN4039: Using the DS89C450 as a Static LCD Display Controller |
|
| Maxim | Ethernet | AN704: Asynchronous Serial-to-Ethernet Device Servers |
|
| Maxim | Ethernet | AN712: DS80C400 Ethernet Drivers |
|
| Maxim | I2C | AN3588: Software I²C Driver for the MAXQ2000 Microcontroller |
|
| Maxim | I2C | AN4267: Proven Implementations of the I²C Bus |
|
| Maxim | Misc. | AN1087: Micro Tutorial 1: Understanding DC Electrical Characteristics of Microcontrollers |
|
| Maxim | Misc. | AN134: Interfacing the DS1620 with a DS5000/8051 Microcontroller |
|
| Maxim | Misc. | AN164: Using the DS1814 MicroMonitor to Control Microprocessor Resets |
|
| Maxim | Misc. | AN1743: Pseudo-Random Number Generation Routine for the MAX765x Microprocessor |
|
| Maxim | Misc. | AN195: TINIm390 Verification Module Chipset Reference Design |
|
| Maxim | Misc. | AN198: Networked Temperature Monitoring |
|
| Maxim | Misc. | AN2033: SRAM-Based Microcontroller Optimizes Security |
|
| Maxim | Misc. | AN2034: Using the DS5250 as a Drop-In Upgrade for the DS5002 |
|
| Maxim | Misc. | AN2035: The Fast 8051 Microcontroller: Leading the Way in Growth and Innovation |
|
| Maxim | Misc. | AN2155: DS80C400 Software PHY Reset |
|
| Maxim | Misc. | AN2197: Driving LEDs with Constant Current Port Expander Outputs |
|
| Maxim | Misc. | AN2198: Driving LEDs with Open Drain Port Expander Outputs |
|
| Maxim | Misc. | AN2199: Driving LEDs with Push-Pull Port Expander Outputs |
|
| Maxim | Misc. | AN2391: Dual Voltage Tracking Circuit for I/O, Microprocessor, and DSP Core Voltages |
|
| Maxim | Misc. | AN244: Advanced 1-Wire Network Driver |
|
| Maxim | Misc. | AN26: DS89C430/DS89C450 Ultra High-Speed Flash Microcontroller Memory Interface Timing |
|
| Maxim | Misc. | AN2863: The Effects of Adjusting the DS1086L's Dither Span and Dither Frequency on EMC Measurements |
|
| Maxim | Misc. | AN3006: Using MAXQ's Multiplier Module |
|
| Maxim | Misc. | AN3007: Logic-Level Translation |
|
| Maxim | Misc. | AN3177: Powering High-Performance ASICs and Microprocessors |
|
| Maxim | Misc. | AN3221: Benchmarking the MAXQ Instruction-Set Architecture vs. RISC Competitors |
|
| Maxim | Misc. | AN3222: Introduction to the MAXQ Architecture |
|
| Maxim | Misc. | AN3384: Accessing the Functions Provided in the MAXQ Utility ROM |
|
| Maxim | Misc. | AN3386: Signal Processing with the MAXQ Multiply-Accumulate Unit (MAC) |
|
| Maxim | Misc. | AN3399: DS80C400 and PHY Reset |
|
| Maxim | Misc. | AN3414: Using a Keypad and LCD Display with the MAXQ2000 |
|
| Maxim | Misc. | AN3452: Instant Performance Enhancement with Flash Microcontrollers |
|
| Maxim | Misc. | AN3478: DS80C400/410/411 Flash Memory Selection |
|
| Maxim | Misc. | AN3493: System-Management IC Meets Monitoring and Sequencing Requirements in Multivoltage Systems |
|
| Maxim | Misc. | AN3537: Environmental Monitoring with the MAXQ3210 |
|
| Maxim | Misc. | AN3545: Resistive Bridge Basics: Part Two |
|
| Maxim | Misc. | AN3563: Using Data Pointers to Read/Write to SRAM |
|
| Maxim | Misc. | AN3569: In-Application Programming of Sector Erasable Program, and Data Flash in a MAXQ Microcontroller |
|
| Maxim | Misc. | AN3593: MAXQ Competitive Analysis Study |
|
| Maxim | Misc. | AN3618: MAXQ Microcontroller Interrupt Programming |
|
| Maxim | Misc. | AN3653: MAXQ Microcontroller Drives a Smart and Intelligent 4-20mA Transmitter |
|
| Maxim | Misc. | AN3693: Why Maxim Chose to Design the Single-Piece NV SRAM Modules |
|
| Maxim | Misc. | AN3720: Options for Embedded User Interfaces |
|
| Maxim | Misc. | AN3729: Using the MAX6951/MAX6950 LED Display Drivers with SPI Interface to Communicate with the MAXQ2000 Microcontroller |
|
| Maxim | Misc. | AN3770: Table Operations for the MAXQ Architecture |
|
| Maxim | Misc. | AN3845: The MAXQ Microcontroller in Action: Designing a Bicycle Computer with the MAXQ2000 |
|
| Maxim | Misc. | AN3885: Using the MAXQ3210 As A Water Sensor/Alarm System |
|
| Maxim | Misc. | AN3913: Using the LCD Simulator with MAX-IDE and IAR Embedded Workbench Development Environments |
|
| Maxim | Misc. | AN3960: Unlocking the Secrets of the MAXQ® |
|
| Maxim | Misc. | AN3965: How to Use the MAXQ3212 Microcontroller as a Digital Thermostat |
|
| Maxim | Misc. | AN3966: Multiplexing JTAG Interface Pins on MAXQ Microcontrollers |
|
| Maxim | Misc. | AN4008: Calling Utility ROM Functions with IAR's Embedded Workbench for MAXQ |
|
| Maxim | Misc. | AN4016: Using the Elliptic Curve Digital Signature Algorithm (ECDSA) with the MAXQ1103's Modular Arithmetic Accelerator (MAA) |
|
| Maxim | Misc. | AN4017: How to Create a MAXQ®-Based "Learning" Remote Control |
|
| Maxim | Misc. | AN4027: How to Update the Firmware in the MAXQ Serial-to-JTAG Board |
|
| Maxim | Misc. | AN4036: Getting Started with the DS8007 Evaluation Kit |
|
| Maxim | Misc. | AN4095: Interfacing the DS5250 with a Magnetic Stripe Card Reader |
|
| Maxim | Misc. | AN4112: Leveraging Nonvolatile Memory Services in MAXQ® Processors |
|
| Maxim | Misc. | AN4153: Using the MAXQ3210 in a Light-Beam Alarm System |
|
| Maxim | Misc. | AN4199: Porting Applications from the High-Speed Micro Family to Ultra-High-Speed Flash Microcontrollers |
|
| Maxim | Misc. | AN4238: Implementing a Soft Stack in Data Memory on the MAXQ2000 |
|
| Maxim | Misc. | AN4350: Reading Temperature Using the MAXQ2010 Evaluation Kit |
|
| Maxim | Misc. | AN4379: Display Different LED Sequences Using the MAXQ2000 Microcontroller with the MAX6970 LED Driver |
|
| Maxim | Misc. | AN4398: MAXQ7667 Transducer Diagnostics |
|
| Maxim | Misc. | AN4400: Pseudo random number generation using linear feedback shift registers |
|
| Maxim | Misc. | AN4420: Automatically Initializing Data Segment Values in MAX-IDE |
|
| Maxim | Misc. | AN4431: Destructive Reset Diagnostic Routine for the MAXQ1103 |
|
| Maxim | Misc. | AN4458: Executing Application Code from RAM on the MAXQ8913 Microcontroller |
|
| Maxim | Misc. | AN4530: Reference Design for a PC-Based Oscilloscope |
|
| Maxim | Misc. | AN4533: An LED Target-Practice Game Uses the MAXQ2000 and MAX7312 |
|
| Maxim | Misc. | AN4642: Getting started with the MAXQ3180: configuring the registers |
|
| Maxim | Misc. | AN4659: Blood glucose meters |
|
| Maxim | Misc. | AN4671: Improve sensor performance and reduce SNR in pulse oximeter designs |
|
| Maxim | Misc. | AN4687: LEDs allow new remote-controlled lighting applications |
|
| Maxim | Misc. | AN4688: Introduction to spirometers and important design considerations for selecting electrical components |
|
| Maxim | Misc. | AN4690: Important design considerations for digital thermometers |
|
| Maxim | Misc. | AN56: The DS80C320 as a Drop-In Replacement for the 8051/8032 Microcontroller |
|
| Maxim | Misc. | AN595: 8051 Microcontrollers: Frequently Asked Questions |
|
| Maxim | Misc. | AN601: Accelerating 16/32-Bit Math Operations with the DS80C390/DS80C400 |
|
| Maxim | Misc. | AN604: Fast Memory Transfers with the Ultra High-Speed Flash Microcontroller |
|
| Maxim | Misc. | AN605: Data Pointer Decrement Feature Simplifies Copy Operation for Overlapping Memory Buffers |
|
| Maxim | Misc. | AN610: Replacing an Atmel TS80C51U2 with a DS80C320/323 Microcontroller |
|
| Maxim | Misc. | AN612: Getting Started with the TINIm400 (DS80C400) Verification Module |
|
| Maxim | Misc. | AN615: Design Considerations for DS80C400-Based TINI Systems |
|
| Maxim | Misc. | AN707: Using the DS80C400 to Maximize System Performance |
|
| Maxim | Misc. | AN81: Memory expansion with the high-speed microcontroller family |
|
| Maxim | Misc. | AN91: Microcontroller Design Guidelines for Reducing ALE Signal Noise |
|
| Maxim | Misc. | AN92: DS5002FP Memory Expansion Techniques |
|
| Maxim | Misc. | AN93: Design Guidelines for Microcontrollers Incorporating NV RAM |
|
| Maxim | Power Management | AN1771: Microcontrollers Improve Power Efficiency of 8051-Based Designs |
|
| Maxim | Power Management | AN3914: Using the MAXQ3212 Microcontroller as an AC-Power Sequencer |
|
| Maxim | Power Management | AN3932: Using the MAXQ3210 as a Microprocessor Supervisor |
|
| Maxim | Power Management | AN4091: Reference Design for Power-over-Ethernet (PoE) Midspan or Endspan Insertion |
|
| Maxim | Power Management | AN4450: Getting Started with the MAX6651 Fan Controller |
|
| Maxim | Power Management | AN78: Using Power Management with High-Speed Microcontrollers |
|
| Maxim | Programming Tools | AN2783: Using the Keil C Compiler for the DS5250 |
|
| Maxim | Programming Tools | AN3084: Configuring Keil µVision IDE for the MAX7651 EV Kit |
|
| Maxim | Programming Tools | AN3087: Downloading a Program to Flash Using the MAX7651 EV Kit Serial Downloader |
|
| Maxim | Programming Tools | AN3262: In-System Programming with 8051-Based Microcontrollers |
|
| Maxim | Programming Tools | AN3267: Using the Keil C Compiler with the DS89C430/450 |
|
| Maxim | Programming Tools | AN3346: Using the SDCC Compiler for the DS80C400 |
|
| Maxim | Programming Tools | AN3362: Using the Keil µVision Debugger with the DS89C4x0 |
|
| Maxim | Programming Tools | AN3378: Getting Started with the IAR Compiler and the MAXQ2000 Evaluation Kit |
|
| Maxim | Programming Tools | AN3383: Programming in the MAXQ Environment |
|
| Maxim | Programming Tools | AN3385: An Example Application Using the MAXQ2000 Evaluation Kit |
|
| Maxim | Programming Tools | AN3477: Using the Free SDCC C Compiler to Develop Firmware for the DS89C430/450 Family of Microcontrollers |
|
| Maxim | Programming Tools | AN3480: The Serial-to-JTAG Board for MAXQ Processors |
|
| Maxim | Programming Tools | AN3550: Using the IAR Compiler for the DS80C400 |
|
| Maxim | Programming Tools | AN3561: Getting Started with MAX-IDE |
|
| Maxim | Programming Tools | AN3905: MAX-IDE Simulator User's Guide for the MAXQ Microcontrollers |
|
| Maxim | Programming Tools | AN4273: Getting Started with the MAXQ1103 Evaluation Kit and the CrossWorks Compiler for the MAXQ30 |
|
| Maxim | Programming Tools | AN4277: Getting Started with the MAXQ2000 USB Thumb Evaluation Kit |
|
| Maxim | Programming Tools | AN4312: Getting started with the MAXQ1850 EV (evaluation) kit and the CrossWorks compiler for the MAXQ30 |
|
| Maxim | Programming Tools | AN4314: Getting Started with the MAXQ610 Evaluation Kit (EV Kit) and the IAR Embedded Workbench |
|
| Maxim | Programming Tools | AN606: Configuring Keil PK51 Tools to Support 24-Bit Contiguous Addressing Mode |
|
| Maxim | Programming Tools | AN613: Using the Keil C Compiler for the DS80C400 |
|
| Maxim | SD/MMC | AN3969: SD Media Format Expands the MAXQ2000's Space for Nonvolatile Data Storage |
|
| Maxim | SD/MMC | AN4029: The DS8007 and Smart Card Interface Fundamentals |
|
| Maxim | SD/MMC | AN4068: Interfacing SD Cards with the TINI System |
|
| Maxim | SD/MMC | AN4120: Using the DS8007 In Smart-Card Transactions |
|
| Maxim | SD/MMC | AN4200: Getting Started with the DS8113 Smart-Card Analog Interface Evaluation Kit |
|
| Maxim | Security | AN101: Using the Secure Microcontroller Watchdog Timer |
|
| Maxim | Security | AN3294: Increasing System Security by Using the DS5250 as a Secure Coprocessor |
|
| Maxim | Security | AN3546: Security System Control with the MAXQ2000 |
|
| Maxim | Security | AN3824: Security in Embedded Systems |
|
| Maxim | Security | AN4004: RSA Key Generation in DS5250 |
|
| Maxim | Security | AN4015: Secure User Authentication with Network Microcontrollers |
|
| Maxim | Security | AN4347: RSA Key Generation Using the MAXQ1103 Microcontroller |
|
| Maxim | Security | AN94: Using the Secure Microcontroller with EPROM/ROM |
|
| Maxim | SPI | AN3078: Ultra-High-Speed Flash Microcontroller Software SPI |
|
| Maxim | SPI | AN3524: Efficient Bit-Banged SPI Port for 8051-Compatible Microcontrollers |
|
| Maxim | SPI | AN4246: How to Use Serial Peripheral Interface (SPI) on the MAXQ3180 Microcontroller |
|
| Maxim | Timing | AN137: Using a EconOscillator™ to Clock an 8051 Microprocessor |
|
| Maxim | Timing | AN2154: Microcontroller Clock—Crystal, Resonator, RC Oscillator, or Silicon Oscillator |
|
| Maxim | Timing | AN232: Using the DS1086 as a Microcontroller Clock to Reduce EMI |
|
| Maxim | Timing | AN3205: Using Timers in the MAXQ Family of Microcontrollers |
|
| Maxim | Timing | AN3582: Replacing Crystals and Ceramic Resonators with Silicon Oscillators |
|
| Maxim | Timing | AN3666: Pulse Width Modulation (PWM) with the MAXQ2000 Timer Type 2 |
|
| Maxim | Timing | AN4060: How to Generate PWM Waveforms Using Timer B on MAXQ Microcontrollers |
|
| Maxim | Timing | AN4399: Modulo Exponentiation Timing with the DS5250 Microcontroller |
|
| Maxim | Timing | AN512: Using the Watchdog/Alarm Counter in the DS1371 and DS1374 Real-Time Clocks |
|
| Maxim | Timing | AN516: Using Multiplexed Bus Clocks with a Microcontroller |
|
| Maxim | Timing | AN548: Using the High-Speed Micro's Watchdog Timer |
|
| Maxim | Timing | AN57: DS80C320 Memory Interface Timing |
|
| Maxim | Timing | AN726: Specifying Quartz Crystals |
|
| Maxim | Timing | AN79: Using the DS87C530/DS5250 Real-Time Clock |
|
| Maxim | Timing | AN89: High-Speed Micro Memory Interface Timing |
|
| Maxim | UART | AN3904: How to Use the MAXQ® Serial Driver to Develop Applications |
|
| Maxim | UART | AN4041: Implementing a Software UART on the MAXQ3210 |
|
| Maxim | UART | AN4351: How to Configure the DS89C430 Dual Serial Ports with Different Timers Using the Keil C Compiler |
|
| Maxim | UART | AN4465: Using the Serial Port on the MAXQ610 Microcontroller |
|
| Maxim | UART | AN600: Ultra High Speed Microcontroller Hardware Enhances Serial Port Capability |
|
| Maxim | UART | AN603: Implementing a Serial Port FIFO Using Dual Data Pointers |
|
| Maxim | UART | AN75: Using the High-Speed Micro's Serial Ports |
|
| Maxim | USB | AN3637: Add USB to Anything |
|
Quick Links:
