MaxiGrip Board Rework

maxiGRIP™ and Board Rework Costs

Advanced Thermal Solutions Inc

This tutorial discusses use of the latest technology to attach heat sinks to BGA devices that minimizes potential damage to either the component or the PCB itself during the rework process.

Related Parts

ImagemNúmero de peça do fabricanteDescriçãoMétodo de fixaçãoFormaAvailable QuantityPreçoVer detalhes
HEAT SINK 27MM X 27MM X 12.5MMATS-52270G-C1-R0HEAT SINK 27MM X 27MM X 12.5MMFita térmica, adesiva (incluída)Quadrado, aletas angulares90 - Immediate$11.14Ver detalhes
HEAT SINK 25MM X 25MM X 14.5MMATS-51250K-C1-R0HEAT SINK 25MM X 25MM X 14.5MMClipe, material térmicoQuadrado, aletas angulares0 - Immediate$12.74Ver detalhes
HEAT SINK 33MM X 33MM X 7.5MMATS-52330B-C1-R0HEAT SINK 33MM X 33MM X 7.5MMFita térmica, adesiva (incluída)Quadrado, aletas angulares77 - Immediate$9.89Ver detalhes
HEAT SINK 27MM X 27MM X 14.5MMATS-53270K-C1-R0HEAT SINK 27MM X 27MM X 14.5MMClipe, material térmicoQuadrado, aletas607 - Immediate$14.17Ver detalhes
HEAT SINK 25MM X 25MM X 12.5MMATS-50250G-C1-R0HEAT SINK 25MM X 25MM X 12.5MMClipe, material térmicoQuadrado, aletas angulares935 - Immediate$14.75Ver detalhes
HEAT SINK 23MM X 23MM X 12.5MMATS-50230G-C1-R0HEAT SINK 23MM X 23MM X 12.5MMClipe, material térmicoQuadrado, aletas angulares60 - Immediate$14.58Ver detalhes
HEAT SINK 19MM X 19MM X 12.5MMATS-50190G-C1-R0HEAT SINK 19MM X 19MM X 12.5MMClipe, material térmicoQuadrado, aletas angulares32 - Immediate$14.33Ver detalhes
HEAT SINK 21MM X 21MM X 12.5MMATS-50210G-C1-R0HEAT SINK 21MM X 21MM X 12.5MMClipe, material térmicoQuadrado, aletas angulares100 - Immediate$14.44Ver detalhes
HEAT SINK 19MM X 19MM X 9MMATS-56001-C1-R0HEAT SINK 19MM X 19MM X 9MMFita térmica, adesiva (incluída)Quadrado, aletas angulares1266 - Immediate$7.51Ver detalhes
PTM Published on: 2011-10-13

Related Videos

ATS Explains - Thermal Interface Material
ATS Explains - Thermal Interface Material

Publish Date: 2018-01-26

Advanced Thermal Solutions - maxiGRIP
Advanced Thermal Solutions - maxiGRIP

Publish Date: 2012-10-15

Related Product Highlight

Heat Sink Attachment Solutions Advanced Thermal Solutions' heat sink attachments give engineers multiple options to mechanically attach almost any heat sink to PCBs.
maxiFLOW™ with maxiGRIP™ Heatsinks ATS BGA cooling solutions with maxiGRIP attachment come preassembled with phase change thermal interface materials for easy installation/removal.

Related Articles and Blogs

Feasibility Study of an LED-Based Lighting System Using Analytical Modeling A study of the heat loads for an outdoor LED-based lighting system using analytical modeling to determine the feasibility of the design with solar heat load.
Device Thermal Coupling on a PCB A look at how components on a printed circuit board thermally couple and the design considerations that help minimize heat dissipation problems.
Air Flow Measurement in Electronic Systems An analysis of circuit board air flow measurement techniques and the considerations required to obtain an accurate reading in this complex environment.

Related Product Training Modules

Introduction to Heat Sinks This module will review the use of heat sinks, including how a heat sink works, the factors that impact heat sink thermal performance, common heat sink materials, and thermal interface materials.
maxiGRIP™ Flip-Chip Overview of the maxiGRIP Flip-Chip and review of importance of selecting the correct TIM.
Phase Change - Pressure Increase maxiGRIP™ ATS maxiGRIP and superGRIP are ideal solutions when used with phase change TIM for increased thermal and mechanical performance.
Termos e condições Declaração de privacidade Configurações de cookies
Copyright © 1995-2026, DigiKey. Todos os direitos reservados.
ECIA Member
This site is protected by VikingCloud's Trusted Commerce program
ECIA Member